Technical Capabilities | Precision CNC Machining for Complex Parts
CNC technical capabilities 5-axis CMM inspection
CNC Capabilities to Meet Your Precision Needs
5-Axis Machining
Complex geometry in one setup
Tight Tolerances
±0.005mm on critical features
Thin-Wall Machining
Down to 0.5mm with stability
Deep Hole Drilling
L/D ratio up to 20:1
Surface Finishes
Ra 0.8 · Anodizing · Passivation
Material Versatility
Aluminum · Steel · Titanium · Inconel · PEEK
CNC technical specifications tolerance material chart
Below is our full CNC machining capability table, tailored for professional buyers. Contact us for custom solutions
| CNC Machining | |
| Max part size | 800 × 500 × 300 mm (customizable) |
|---|---|
| Tolerance | ±0.005mm (standard ±0.01mm) |
| Spindle speed | Up to 20,000 RPM |
| Surface finish | Ra 0.8 (standard Ra 1.6) |
| Materials | |
| Aluminum | 6061, 7075, 2024, 5052 |
| Stainless steel | 303, 304, 316, 17-4PH |
| Steel | 45#, 4140, 4130, 4340 |
| Titanium | Grade 2, Grade 5 (6Al-4V) |
| High-temp alloys | Inconel 625, 718, Monel |
| Plastics | PEEK, POM, PTFE, ABS |
| Secondary Services | |
| Heat treatment | Annealing, hardening, stress relief |
| Surface finishing | Anodizing, passivation, plating, powder coating |
| Inspection | CMM, micrometer, surface roughness tester |
Quality & Inspection
• CMM Inspection – ±0.001mm accuracy on complex geometry
• First Article Inspection – AS9102 compliant FAI report
• Material Certification – Mill certs & full traceability
Discuss Your Technical Requirements
✅ Free DFM feedback | ✅ Full inspection report | ✅ 24h quote